Allow iCloud Drive to Access Files on your Mac. It is quite possible that you may have already provided iCloud Drive with access to Files located on the Desktop and Documents Folder of your Mac. In case you haven’t, follow the steps below to provide iCloud Drive with access to Files located on your Mac. On your Mac, click the Finder icon in the Dock to open a Finder window, then navigate to where you want to create the folder. Alternatively, click the desktop if you want to create the folder on the desktop. Choose File New Folder, or press Shift-Command-N. If the New Folder command is dimmed, you can’t create a folder in the current location.
A download is pretty much useless if you can't find it on your Mac. But that won't be a problem for you, because we're about to discuss multiple quick and easy ways to locate files on your. In this guide I explain how to access and recover files from a failed MacBook Air, assuming it’s not the hard drive or solid state drive (SSD) related failure. Let’s say the laptop suffered from liquid spill, was dropped or just stopped working but you don’t have your files backed up.
You may need to access content in the user Library folder to troubleshoot problems with your Adobe applications. The user Library folder is hidden by default in macOS. Use one of the following methods to make the user Library content visible.
In the Finder, hold down the Option key when using the Go menu. Library will appear below the current user's home directory.
Note:
After you open the Library folder, you can drag the Library icon from the top of that window to the Dock, sidebar, or toolbar to make it readily accessible.
More like this
In this guide I explain how to access and recover files from a failed MacBook Air, assuming it’s not the hard drive or solid state drive (SSD) related failure.
Let’s say the laptop suffered from liquid spill, was dropped or just stopped working but you don’t have your files backed up.
MacBook Air (Late 2008 and Mid 2009)
These models came equipped with a 1.8″ 120GB SATA HDD or 128GB SSD with a 24 pin ZIF connector.
For the following procedure you will need a small Phillips screwdriver (size #0).
STEP 1.
Remove 10 screws securing the laptop bottom cover. Remove the cover.
The hard drive located on the left side from the fan.
STEP 2.
Disconnect the DVI/USB/Audio port cable from the logic board.
Just lift it up by the black tab attached to the connector.
STEP 3.
Disconnect the hard drive cable from the logic board.
Remove 4 screws securing the mounting bracket.
STEP 4.
Remove the hard drive.
Macbook Folder Icon
While removing it, you will have to un-route the wireless antenna cable attached to the mounting bracket.
STEP 5.
Very carefully lift up the cable retainer located on the hard drive connector (green arrow).
The retainer will open up at a 90 degree angle.
Pull the cable out of the connector (yellow arrow).
STEP 6.
In order to access data on the hard drive I’ll be using a 24 Pin SATA LIF Macbook Air SSD HDD SATA Adapter.
This adapter is available on Amazon.
STEP 7.
Connect the flat cable to the adapter.
Note that contacts on the cable are facing upwards.
STEP 8.
Lock the connector by sliding the retainer to the shown direction.
STEP 9.
Now connect the second end of the flat cable to the hard drive.
I had some trouble inserting the cable because it was too tight.
Make sure the cable is plugged all the way down into the connector.
Do not bent the cable because it can be easily damaged.
Note that contacts on the cable are facing downwards.
STEP 10.
Lock the connector.
You have to make sure that the cable is plugged correctly and contacts on the cable are aligned with the contacts on the connector.
STEP 11.
The hard drive is almost ready for data recovery.
STEP 12.
In order to connect the hard drive adapter to another Mac computer you will need a SATA to USB cable.
STEP 13.
Connect the cable to the hard drive adapter and plug it into another working Mac computer.
If everything is connected properly and the hard drive not failing, it should be detected by the Mac.
Now you can access your files.
MacBook Air 11-inch or 13-inch (2010/2011, 2012, 2013- Current models)
For the following procedure you will need Torx T5 screwdriver and 5-Point Torx Plus (Pentalobe compatible) screwdriver.
STEP 1.
Remove 10 pentalobe screws from the bottom cover. Remove the cover.
STEP 2.
Remove one Torx T5 screw securing the SSD.
STEP 3.
Pull the SSD out of the slot.
For data access and recovery you will need a special external enclosure for Apple SSD drives available on eBay or Amazon.
STEP 4.
SSDs installed in MacBook Air (2010/2011), MacBook Air (2012) and MacBook Air (2013/2014/2015/2017) models are different, even though they look similar.
The SSD removed from a 2010/2011 model will not fit into 2012 or 2013-Current year enclosure and vice versa.
IMPORTANT NOTE: The OWC Envoy enclosure has been specifically designed for use ONLY with the factory SSD found installed in Apple MacBook Air. Do not try to install a third party SSD into this enclosure or you will damage the drive.
STEP 5.
Macbook Air Access Download Folder Shortcut
Select the right enclosure for your laptop and mount the SSD.
Assemble the enclosure.
STEP 6.
Connect the enclosure to another Mac computer via provided USB 3.0 cable.
Macbook Air Access Download Folder Windows 10
If the SSD is in good working condition your Mac should detect it.
Applications Folder Macbook
Now you can access and recover needed files.
Free Downloads Macbook Air
You can use Migration Assistant software (built into Mac OS X) to transfer all personal files, settings and applications to another Mac computer.